Speak to one of our Camping & Outdoor experts. Call us on 02 888 10 333 or chat with us Mon - Fri 9 am to 5:30 pm AEST.

Victron Smart IP22 SLA/2x VoltX 12V 100Ah Pro+ LiFePO4 Battery

$1,799.00 $3,529.00
Tax included

60 Days
Return

12 Months
Warranty

100% Secured
Payment & Data


Selling fast Selling fast. Hurry and order now to save 49%

PRODUCT HIGHLIGHTS

  • LiFePO4 comprised of prismatic cells & a built-in BMS
  • High energy density for increased capacity in lightweight form
  • 94% charger efficiency rate and Bluetooth connectivity
  • Victron top quality charger with adaptive 6-stage charge algorithm
  • Ideal combo for outdoor recreational, backup, and off-grid applications
Shipping Calculator

MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger

Meet the perfect pair to your VoltX Battery: The renowned Victron Smart Battery Charger! Bluetooth-compatible for easy monitoring and equipped with advanced charging features including storage and night mode, it’s a must-have to keep that power pack in excellent condition.

Maximum Safety and Efficiency
Charging has never been this easy. With up to 94% efficiency rate, the Victron charger is designed to top up batteries fast and with zero interruptions. It’s also safer with four times less heat, and once the battery is fully charged, power consumption is reduced to five or even 10 times better than the industry standard.

Adaptive 6-Stage Charge Algorithm
The Victron Smart charger features a 6-stage algorithm: test - bulk – absorption - recondition – float – storage. It also has a microprocessor-controlled ‘adaptive’ battery management, which allows for an optimised charging process in accordance to the way the battery is being used.

Storage Mode
Batteries tend to be vulnerable to damage when stored–an issue that Victron chargers managed to address. In the storage mode, float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalise’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Night and Low Setting
Charging during your down time? Take advantage of Victron’s Night and Low setting. In this mode, the output current is reduced to max. 25% of the nominal output and the charger operates without any noise. The Night mode automatically ends after 8 hours, while the Low mode can be ended manually.

Protected Against Overheating
Keep your battery protected from overheating with extra protection from Victron. Thanks to this feature, the output current will reduce as temperature increases up to 50°C, without compromising the performance of the charger itself.

MODEL 2: VoltX 12V 100Ah Pro+ LiFePO4 Battery

Make way for our Pro+ LiFePo4 Battery! Boasting top-notch performance and stellar reviews across different platforms, you’ll love two of these in our VoltX-Victron Bundle to keep your home or adventure powered up.

Stable, Long-lasting Output
Our VoltX LiFePO4 Batteries are known for their longevity and extended lifespan, which are significantly better compared to other battery chemistries. Pack this to your outdoor adventure and run your essentials in confidence.

User-centric Build
Ideal for both first-time and seasoned battery users, our VoltX LiFePO4 Batteries are safer and less prone to catching fire. They also boast a non-toxic composition to ensure environmental safety, allowing you to power up the eco-friendly way.

Versatile Applications
Built to withstand the Aussie outdoor conditions and long-lasting enough to serve as a backup power for your home, there’s nothing the VoltX Pro+ can’t do. You can even use this in dual battery setups for boats and 4WDs!

Don’t miss this high-power bundle and get yours before stocks run out.

IMPORTANT: While our LiFePO4 batteries are top-notch & can be wired with other batteries of its kind, it is not advisable to connect any LiFePO4 batteries in parallel or series. This poses several risks and should only be done in emergency situations. If you must wire batteries together, make sure you are familiar with the correct procedure or seek help from a professional if needed.

Suggestions From the Outbax Team

  • Batteries connected in series should have the same amp-hour rating while batteries in parallel bank should have the same voltage rating.
  • As much as possible, only connect batteries in series or parallel during emergency situations.
  • It's better to go for batteries with higher voltage when running high-power electrical appliances instead of wiring two battery packs together.
  • We have available batteries with larger discharge parameters for fast charge/discharge requirements.
  • Our batteries are also available in 200Ah and 300Ah for larger capacity demands.

Safe & Secure

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

We ensure secure processing of your payment information and do not retain or have any access to your credit card details.

Victron Smart IP22 SLA/2x VoltX 12V 100Ah Pro+ LiFePO4 Battery

$1,799.00 $3,529.00

MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger

Input voltage range: 180 - 265 VAC
Charge current, normal mode: 15 / 20 / 30 A
Charge current, NIGHT or LOW: 7.5 / 10 / 15 A
Efficiency: 93 %
No load power consumption: 0.5 W
Frequency: 45 - 65 Hz
Number of outputs: 1
Charge Voltage Absorption: Normal: 14.4V
High: 14.7V
Li-ion: 14.2V
Charge Voltage Float: Normal: 13.8V
High: 13.8V
Li-ion: 13.5V
Charge Voltage Storage: Normal: 13.2V
High: 13.2V
Li-ion: 13.5 V
Charge algorithm: 6-stage adaptive
Can be used as power supply: Yes
Protection: Battery reverse polarity (fuse)
Output short circuit
Over temperature
Operating temp. range: -40 to +60 °C (full rated output up to 40 °C)
Humidity (non-condensing): Max 98 %

ENCLOSURE

Material & Colour: Aluminium (blue RAL 5012)
Battery connection: Screw terminals 16 mm⊃ / AWG6
230 VAC connection: Cable of 1.5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category: IP22
Dimensions: 235(H) x 108(W) x 65(D) mm
Weight: 1.3 kg

STANDARDS

Safety : EN 60335-1, EN 60335-2-29
Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive: ECE R10-5

MODEL 2: VoltX 12V 100Ah Lithium Iron Phosphate Battery

Nominal Capacity: 100Ah
Usable Capacity: 100Ah
Nominal Voltage: 12.8V
Rated Energy:

1280wh

Charge Voltage: 14.6V
Discharge Cut-off Voltage: 10V
Charge Method: CC/CV
Charger: 14.6V50A
Standard Discharge Current 100A
Max. Continues Discharge Current: 100A
Max. Discharge Current (5sec): 300A
Standard Charge Current: 50A
Max. Charge Current: 100A
Working Temperature Range Charge: 0°C to 45°C
Discharge:-20°C to 60°C
Storage Temperature: -10°C to 50°C
Dimension: 306(L) x 169(W) x 215(H)mm
View product