New at Outbax · VoltX Indevolt PowerFlex 3000
Charge up on free electricity.Use it later.
The PowerFlex 3000 is a power station that charges itself during your free or cheaper electricity hours, then powers your everyday appliances when you need them.
Made for free electricity windows
Set it once in the app (iOS & Android)
Plugs into a wall socket
Starts at 2 kWh, grows to 12 kWh
Selling fast. Hurry and order now to save 22%
60 Days
Return
10 Years Warranty
100% Secured
Payment & Data
CHARGE FREE, USE LATER. IT'S THAT SIMPLE
The VoltX Indevolt PowerFlex 3000 works like a smart power station. It charges up while electricity is free or cheap, holds onto it, and powers your appliances when you need them.
-
Plug it in
As a power station, the PowerFlex 3000 requires no drilling or complicated installation. Simply plug it into a suitable wall socket, charge during free or lower-cost electricity periods, and use that electricity later when needed.
-
Set your schedule in the power station app*
PowerFlex 3000 is a power station with an AC outlet built in, so you plug your TV, lamps, laptop, fridge, or other everyday appliances into it. They run on the electricity you charged earlier in the day, instead of peak-rate electricity.
-
Use it when you get in
PowerFlex 3000 is a power station with an AC outlet built in, so you plug your TV, lamps, laptop, fridge, or other everyday appliances into it. They run on the electricity you charged earlier in the day, instead of peak-rate electricity.
Example: NSW / South East QLD Solar Sharer schedule**
| Time | Mode | What’s happening |
|---|---|---|
| 11 AM – 2 PM | CHARGE | Charges up during the free window |
| 2 PM - 6 AM | STANDBY | Holds its charge while you’re out |
| 6 PM - 10 PM | POWER | Runs your appliances during peak-hour rates |
*App interface shown for illustration only; final interface may vary. A scheduled charging period does not guarantee a full charge. Actual charge depends on starting battery level, configuration, charge settings, and power used by connected appliances.
**Example schedule only. How long PowerFlex 3000 powers your appliances depends on your configuration, charge level, and how much power they use. More expansion batteries give you more capacity.
On an off-peak or time-of-use plan?
Just set your charge window for PowerFlex 3000 to your plan’s cheapest hours.
Not a free-power area? It still works for you.
Many electricity plans across Australia offer off-peak, time-of-use, or lower-rate periods, including in WA, Tasmania, the ACT, and the NT. PowerFlex 3000 works the same way with any of them: charge up when electricity is cheapest, use it when it’s dearest.
FITS YOUR SPACE. FITS YOUR LIFE.
-
Renter-Friendly, Nothing to Install.
It plugs into a suitable wall socket, so there’s no drilling and no changes to your walls. That makes it a natural fit for apartments, units, and rentals, and for anyone who wants to start small. Moving out? Unplug it and take it with you to your next place.
-
Designed to Fit In
A clean, compact design that sits neatly beside the fridge, under a desk, or next to the TV unit. It looks just as at home in a one-bedroom apartment as it does in a family living room.
-
A Little Help When the Power Goes Out
In a rental, a blackout leaves you with few options. The VoltX Indevolt PowerFlex 3000 may help power a lamp or phone charger plugged into it, depending on how much charge it holds and what you plug in.
Built for daily charging. Covered by a 10-year warranty.
8,000 Cycles
Long-life LiFePO4 battery chemistry,
made to be charged every day10-year Warranty
Buy it once, trust it for years
95% DoD
Use almost all of the charge you pay nothing for
VoltX Indevolt PowerFlex 3000 has a built-in BMS protection that monitors and safeguards the cells every time they charge and power your appliances.
Frequently Asked Questions
-
What is the PowerFlex 3000?
It’s a smart power station that charges from a wall socket when electricity is free or cheaper, then powers the appliances you plug into it later in the day.
-
Do I need solar panels?
No. PowerFlex 3000 charges from a suitable wall socket only, and it can’t be connected to solar panels. The Solar Sharer Offer doesn’t require solar either.
-
Does it need to be installed by an electrician?
No. Just plug it into a suitable wall socket and plug your appliances into the PowerFlex 3000.
-
Does it power everything?
No. PowerFlex 3000 powers appliances plugged directly into it.
-
How do I qualify for the free 3-hour window?
You’ll need to be an eligible customer with a smart NMI meter, on a qualifying retailer’s Solar Sharer plan. Contact your retailer to check and opt in.
-
What if I’m not on a free-power plan?
PowerFlex 3000 works with any plan that has cheaper periods, like off-peak or time-of-use. Set your charge window to your cheapest hours in the app.
-
Will it fully charge in 3 hours?
It depends on your starting charge level, configuration, settings, and what’s plugged in at the time.
-
Can I add more later?
Yes. Add expansion units up to approximately 12 kWh. Expansion units are sold separately.
-
What appliances can I run?
Everyday appliances such as TVs, lamps, laptops, modems, fans and compatible fridges can be used within the output limit of your PowerFlex configuration. The base Power Module supports up to 1000W, adding one Battery Module increases output to 2000W, and two or more Battery Modules enable up to 3000W.


















