No products found
Outdoor lighting is growing in popularity as an addition to many homes as it not only increases the curb appeal, but helps with security and ensuring the safety of guests. From the gorgeous outdoor pendant that greets you at the front door, to the modern post lighting that guides your way through the back yard, outdoor lighting can help enhance all exterior areas around your home.
And here are some of the great things about using outdoor lighting from Outbax mixed in with some helpful tips:
No Electrical Experience Necessary
Since most outdoor lighting is low voltage, it's safe and easy enough for any DIYer to install. In fact, the only special tool you'll need is a wire stripper.
Install Underground Wiring After Planting
To prevent accidental cutting of wiring for ground-level fixtures, install wiring after your landscape has been planted. That way you won't accidentally chop through it with a shovel. Also, don't install wiring in digging areas like garden beds, and be sure to bury low-voltage wire at least 6 inches below the surface.
How It All Fits Together
A low-voltage system has three parts: The transformer plugs into a nearby GFCI-protected outlet and reduces 120-volt current to 12 volts. The low-voltage cable carries current between the transformer and the light fixtures. The light fixtures get connected to the cable with wire connectors made specifically for outdoor use.
Keep Your Fixtures; Upgrade Your Bulbs
For decades, halogen lights reigned supreme in low-voltage outdoor lighting systems, but LEDs have all but replaced them because they cost less to operate and last much longer. But you don't have to tear out all your old halogen fixtures to enjoy the benefits of LEDs-retrofit bulbs are available.
Just be sure to replace each halogen bulb with equivalent wattage and the same base type. Expect to pay about four times more for an LED bulb, but they use less energy and you'll get up to 20 years of life from one compared with only two or three years from a halogen.
Don't Overlap Pools of Light
The purpose of most deck lighting is ambience, and professional outdoor lighting designers say it's best not to create overlapping 'pools' of light on decks and patios. So avoid mounting fixtures too close together.
For decks, choose fixtures that cast a 4- to 5-ft. pool of light. Keep them 30 in. up off the deck's floor and space them up to 10 ft. apart. Overlapping lights on deck stairs and walkways can be a good thing, however, by providing enough light to help people avoid tripping.
Go Solar
Options for solar landscape and deck lights have exploded at home centers. And there are some reasons to love them: instant installation, no wiring and no increase in your electric bill. Just don't expect the same kind of light you'd get with 12-volt systems. Solar fixtures typically produce fewer lumens, which means they're not as bright.
Indirect Lighting Works Great for Patios
Instead of focusing lights directly onto a patio, try lighting objects around it, like boulders and trees. This eliminates glare and creates attractive shadow effects.
Kits for Convenience
You can buy complete ground-level landscape lighting kits at home centers. Kits are convenient and adequate if you only need a few fixtures. But the transformer-sometimes called a power pack-will be too small if you decide to add more fixtures down the road, and style options for fixtures will be much more limited with a kit. For a deck lighting system, plan to buy individual components.
Skip the Quick Connectors
Some landscape lighting kits have pre installed quick connectors, but they aren't what the pros use. Cheap connectors buried underground will work for a while, but they can corrode over time and fail. Cut off the factory-installed connectors and make splice connections using gel filled wire connectors made specifically for outdoor use.
Experiment with Clamp Lights
Before you buy anything, make a sketch of your deck or patio on graph paper (or use a program like Sketch-Up) and plan the location for each of your new light fixtures. To get an idea of the effect a fixture will give, pick up a clamp light-the kind with a metal reflector shade-and a few different types of lightbulbs with different brightness levels.
You Can Keep Your Old Transformer
Any older low-voltage transformer can be used to power both halogen and LED lights-even if they're mixed on the same circuit-as long as you have enough wattage to spare in your old transformer. If your transformer isn't big enough to handle the additional load, add a second transformer or upsize your existing one.
All of our Outdoor Lights are made from quality materials that are guaranteed to be safe, comfortable and will last for a long time.
If you have never tried ordering Outdoor Lights online before, feel free to call us at 02 888 10 333 and ask questions about our products. We will be happy to assist you.
